Wind resistence class : 2 – 70 N/m²
Max 38 km/h
CE UNI EN 13561

Awnings with extendable aluminium arms and triplex chain in stainless steel. Possibility for micrometric regulation of the inclination of each arm at the time of installation.
Arm movement on self-lubricated bushings. The arm pivots, tips and connector are in forged aluminium with high mechanical resistance.

Awnings are normally designed for a maximum inclination of 25-30°. For lower slopes, and therefore with the awnings installed almost horizontally, the cloth tension may be scarce in the central section due to the weight of the fabric itself.


[wptb id=11350]

Other colours by quotation

Maximum projection 4 m

Inclination min 8° / max 70°

Projection 300350400
Minimum achievable width 345396443

Technical information

All fasteners are in stainless steel or steel with GEOMET® 321 treatment.
Unless otherwise specified in the order, the screen will have the following characteristics:

  • classic model;
  • right-hand control (external front view);
  • reinforcement in ral 9010;
  • SunStop stitching (TENARA or WELDED on request at no extra cost);
  • valance design 02 (h 25 cm).
  • universal installation.

Awnings are delivered assembled up to 7 m wide.
For larger sizes the profiles will be divided into two parts and the cloth will be supplied separately.
Waterproof acrylic fabrics welded as part of standard production. Note that the awnings, even if produced with waterproof acrylic fabrics or pvc, have been designed and structured only as solar protection.
The size in width always considers the outer side plates.

If a valance is requested in a different colour to the fabric, the cost of an additional valance will be charged.



Winch operation rate 1

Projection Width
400 500 600 700 800 900 1000
3 4 4 4 6 6 8
3 4 4 4 6 6 8
- 4 4 4 6 6 8
NO NO NO 1 2 2 2
⦿ b b c* b b b b


▲: Supports

Arms =  2      3      4  

⦿: Roller tube:
b from width 500 and from 601 to 1000 Ø 78
c* Ø 85 – from width 501 to 600
*only maximum projection 3 m and not speedy operation

⦾: Roller support
N.B. for 600 x 350 cm pointed roller Ø 78 with 1 reinforcement.

 ______  : For this size we suggest the addition of the arm.
N.B. For a 350 cm ledge, we recommend you to add another arm, when the width of awning exceed 792 cm.
For a 400 cm ledge, we recommend you to add another arm, when the width of awning exceed 655 cm and 882 cm.